Check Point CVE-2026-123039: PHP2Shell Attacks and Fixes

Attackers broke into Check Point gateways through PHP2Shell in the Mobile Access Portal, then used CVE-2026-123039 in the Gaia DynamicCLI service to become root. One set of Jumbo Hotfix takes fixes both.

Find your fixed take
By CalMax Systems Security Research · Last updated: November 16, 2026

What is CVE-2026-123039 and how do I fix it?

CVE-2026-123039 lets any local process on a Check Point appliance run commands as root through the Gaia DynamicCLI service. Attackers chained it after PHP2Shell. Install Jumbo Hotfix R82.20 Take 14, R82.10 Take 52, R82 Take 132 or R81.20 Take 174. If you can’t yet, disable the dynamic_server process.

CISA added CVE-2026-123039 to its Known Exploited Vulnerabilities catalog on November 13, 2026, with a November 16 deadline for US federal agencies. Check Point says a couple of dozen customers were attacked.

Fixed Jumbo Hotfix Takes by Version

From Check Point sk1000362 (CVE-2026-123039, last modified November 12, 2026) and sk1000302 (PHP2Shell, last modified November 12, 2026).

Gaia version CVE-2026-123039 (sk1000362) PHP2Shell, CVE-2026-109618 / 109619 (sk1000302)
R82.20 Jumbo Hotfix Take 14 and later Jumbo Hotfix Take 14 and later, or the standalone hotfix
R82.10 Jumbo Hotfix Take 52 and later Jumbo Hotfix Take 52 and later, or the standalone hotfix
R82 Jumbo Hotfix Take 132 and later Jumbo Hotfix Take 132 and later, or the standalone hotfix
R81.20 Jumbo Hotfix Take 174 and later Jumbo Hotfix Take 174 and later, or the standalone hotfix
R81.10, R81 (end of support) Listed as affected; no fix take listed R81.10: standalone hotfix listed. R81 and older: end of support
Spark firewalls Not affected R82.00.11 from build B998002843; R81.10.17 from build B996005005 (sk1000302’s download table lists different build numbers; confirm in the SK before installing)
Which products? sk1000362 lists Check Point Force Firewalls, Management and Log Servers, Multi-Domain Security Management and Multi-Domain Log Server, and Maestro Orchestrator as affected by CVE-2026-123039, and Spark firewalls and Smart-1 Cloud as not affected. PHP2Shell affects gateways, not Security Management or Log Servers. Check Point’s November 12 blog post recommends the November Jumbo Hotfix on all Management Servers and Security Gateways.
The standalone PHP2Shell hotfix needs a reboot. sk1000302 offers it for R82.20, R82.10, R82, R81.20 and R81.10 if you can’t move to the listed Jumbo take. It fixes PHP2Shell only; for CVE-2026-123039, check sk1000362.

How the Attack Worked

PHP2Shell gave the attackers code execution through a portal. CVE-2026-123039 turned that into root.

Step 1, initial access: PHP2Shell. CVE-2026-109618 and CVE-2026-109619 are PHP flaws that Check Point rates 9.2. On gateways they are reachable through web portals. Check Point says initial access in these attacks “was gained through exploitation of PHP2Shell in the Mobile Access Portal.” Fixes had been available since October 23, a week before the first attack.

Step 2, root: CVE-2026-123039. The dynamic_server process runs as root and listens on a local control socket that any user can write to. A process running as the portal’s service account can send it commands and have them run as root. Check Point scores it 7.8 (CVSS 3.1, local).

Step 3, what they did with root. Check Point Research describes PHP webshells placed in the portal’s templates directory, a backdoor it calls TSGA, an internal network scanner, an SSH hop to a VMware ESXi host using the vpxuser account, and in some cases a wiper.

Date (2026)Event
October 21Check Point publishes sk1000302 for PHP2Shell
October 23PHP2Shell fixes available
October 26CISA adds CVE-2026-109618 and CVE-2026-109619 to the KEV catalog
October 30First wave: Israeli organizations, with destructive activity against some
November 2Second, broader wave across multiple countries
November 4Last activity Check Point observed
November 8Check Point creates sk1000362 for CVE-2026-123039
November 12Check Point advisory blog post and Check Point Research report
November 13CISA adds CVE-2026-123039 to the KEV catalog (federal due date November 16)

Check Point says “only a couple of dozen unpatched systems, in a single region, were compromised.” Check Point Research lists the attacker addresses 130.94.19[.]204 and 130.94.19[.]168, on a VPS provider. It does not attribute the campaign with confidence: the PhiliKit malware used here is associated with the China-nexus group UNC5221, but the researchers say the evidence doesn’t support a high-confidence call.

Are you exposed? A gateway on an affected version is exposed to PHP2Shell if it uses any of these features, per sk1000302: Mobile Access Portal, Remote Access VPN with SSL Network Extender, Remote Access VPN with SAML Realm authentication, Identity Awareness Captive Portal, UserCheck Portal or Zero Phishing. CVE-2026-123039 then gives root to anyone who gets code running on the box.

How to Check Your Gateway

Commands from sk1000362, run in Expert mode.

1. Is the control socket locked down?

ls -l /tmp/dynamic_socket

Fixed: srw-rw---- root config (0660). Vulnerable: srwxrwxrwx (0777), writable by every user.

2. Is dynamic_server running?

ps auxw | grep -v grep | grep 'dynamic_server'

A line ending in /usr/bin/dynamic_server means the process is running. That’s normal on a patched system; on an unpatched one it is the vulnerable service.

3. Search the DynamicCLI log for abuse

Commands that arrived without Check Point’s normal wrapper:

grep "Received =" /var/log/dynamicCli.log | grep -vF "CPprofile.sh >> /dev/null; export SP_DISTRIBUTE=0; set -o noglob;"

Use of the system() sink:

grep -F "Received = #return_value#" /var/log/dynamicCli.log

Common attacker commands:

grep -EI "Received =.*( id;| whoami| /etc/shadow| ncat| nc -| /dev/tcp| curl | wget | base64| useradd| authorized_keys)" /var/log/dynamicCli.log

After the fix, blocked attempts are logged:

grep "Rejected connection from unauthorized uid" /var/log/dynamicCli.log

4. Look for the files Check Point Research found

  • Webshells named zz<random>.tpl in the portal’s templates directory, and /tmp/.up.tpl
  • Session artifacts under /opt/CPcvpn-R81.20/tmp/ containing upload_progress_pwn
  • /tmp/CPconfigdaemon, /tmp/.bd.log, /tmp/.p_sock and /lib/libcpfwcommon.so
  • A persistence entry named slot_CPconfigdaemon, and listening TCP port 11072
  • Connections to or from 130.94.19[.]204 and 130.94.19[.]168

The full list, with file hashes, is in the Check Point Research report. If you find any of these, treat the gateway as compromised and contact Check Point support.

Workarounds if You Can’t Patch Yet

Both are temporary. Install the Jumbo Hotfix as soon as you can.

CVE-2026-123039: stop and disable dynamic_server

sk1000362 says to stop and disable the process with dbset, then save:

dbset process:dynamic_server
dbset :save

That is the command exactly as sk1000362 prints it, with no value after dynamic_server. To turn the process back on later, run dbset process:dynamic_server t, then dbset :save. While it is off, the Dynamic CLI commands listed in sk144112 fail.

PHP2Shell: deny multipart requests to the portal

sk1000302 gives a cp-httpd.conf change that denies requests with a multipart Content-Type, followed by a restart of the portal services. The steps differ for standalone gateways, Maestro and ElasticXL Security Groups, and Spark firewalls, so follow sk1000302 for your platform. Remove the workaround lines before you install the hotfix.

The September Check Point Flaws Still Worth Checking

Two exploited flaws from September 2026. If a gateway or management server missed those takes, it still needs them.

CVE What it is Affected Fixed Workaround
CVE-2026-85102
CVSS 9.8
In CISA KEV since September 22
Improper validation of certificate data during VPN negotiation; an unauthenticated remote attacker may run code on the Security Gateway. Affects Site-to-Site VPN that uses or allows certificate authentication (including Dynamic IP and Large Scale VPN gateways) and Remote Access VPN. Pre-shared-key-only communities are not affected. R81.20, R82, R82.10; Spark R81.10.x and R82.00.x; end-of-support R80 to R81.10. R82.20 is not affected. LivePatch Take 26 (R82.10, R82, R81.20), or Jumbo Hotfix R82.10 Take 44, R82 Take 126, R81.20 Take 166, R81.10 Take 190. Spark R82.00.10 build 2325, R81.10.17 build 4968. Disable the VPN implied rules and allow UDP 500/4500 (plus TCP 443/80 for Remote Access) only from known peers or client ranges. Not available on locally managed Spark firewalls; patch those.
CVE-2026-93616
CVSS 9.8
In CISA KEV since September 22
Directory traversal and file upload: an unauthenticated attacker can upload and run scripts on the management server. Security Management, Multi-Domain Security Management, Log Server, Multi-Domain Log Server, SmartEvent: R82.20 (all), R82.10 Take 44 and lower, R82 Take 126 and lower, R81.20 Take 166 and lower, R81.10 Take 190 and lower, R80 to R81. Firewall appliances and Spark are not affected. R82.20 Security Hotfix or Jumbo Take 10; R82.10 Take 45; R82 Take 127; R81.20 Take 170; R81.10 Take 192. LivePatch does not fix it. Allow TCP 19009 only from trusted IP addresses, and restrict Trusted Clients.

Check Point says CVE-2026-85102 was being exploited on Spark firewalls from September 12, 2026, and that the attempts “originated from anonymization infrastructure, including VPN services and proxies.” To hunt for it, sk1000117 says to search logs for certificate-based Mobile Access logins after that date, with subjects such as CN=vpn,OU=users,O=global, and to look for internal scanning by those users. For CVE-2026-93616, Check Point reports “a handful of pinpointed attacks,” dating back to July 23, 2026; sk1000171 lists what to search for in $MDS_FWDIR/log/cpm.elg*.

Before and After You Patch

The fix closes the hole. It doesn’t tell you whether someone already used it.

Before

After

Where a Block List Fits

These are software flaws, and only the hotfix fixes them. What a block list can do is narrow who reaches your portals in the first place. Check Point says the September VPN attacks came from VPN services and proxies, and its workarounds for both September flaws restrict who can connect. ThreatListPro supplies a list of 5.4M+ IPv4 addresses seen attacking VPNs, from real attacks on live production Palo Alto GlobalProtect VPN portals in the US, checked for new attackers every 6 hours. Check Point gateways can load it as a dynamic object; see the Check Point setup guide.

It doesn’t stop an attacker using an address that isn’t on the list, it covers IPv4 only, and it is no substitute for patching.

Check Point CVE-2026-123039 FAQs

Is CVE-2026-123039 being exploited?

Yes. Check Point says it observed active exploitation against a couple of dozen customers, after attackers first broke in through PHP2Shell in the Mobile Access Portal. CISA added CVE-2026-123039 to its Known Exploited Vulnerabilities catalog on November 13, 2026, with a November 16 deadline for US federal agencies.

Which Jumbo Hotfix fixes CVE-2026-123039?

Check Point sk1000362 lists the fix from Jumbo Hotfix R82.20 Take 14, R82.10 Take 52, R82 Take 132 and R81.20 Take 174. According to sk1000302, the same takes also fix PHP2Shell (CVE-2026-109618 and CVE-2026-109619). R81.10 and R81 are end of support, and sk1000362 lists no fix take for them.

Can CVE-2026-123039 be exploited remotely?

Not on its own. It is a local privilege escalation: the attacker must already be able to run code on the appliance. In the October and November attacks, PHP2Shell in the Mobile Access Portal gave them that foothold, and CVE-2026-123039 turned the portal service account into root.

Is there a workaround for CVE-2026-123039?

Yes. Check Point says to stop and disable the dynamic_server process with dbset and save the change. Dynamic CLI commands listed in sk144112 stop working while it is off. For PHP2Shell, sk1000302 gives a cp-httpd.conf change that denies multipart requests; remove it before you install the hotfix.

Which Check Point features does PHP2Shell affect?

Check Point sk1000302 lists gateways that use the Mobile Access Portal, Remote Access VPN with SSL Network Extender, Remote Access VPN with SAML Realm authentication, the Identity Awareness Captive Portal, the UserCheck Portal or Zero Phishing. It lists Security Management, Log Servers and Maestro Orchestrator as not affected by PHP2Shell.

Who was behind the PHP2Shell attacks on Check Point gateways?

Nobody has been named with confidence. Check Point Research notes that the PhiliKit malware used here is associated with the China-nexus group UNC5221, but says the evidence does not allow a high-confidence assessment. The first wave, on October 30, targeted Israeli organizations, and some of those attacks were destructive.

Sources

Narrow Who Reaches Your VPN

ThreatListPro covers 5.4M+ IPv4 addresses and is checked for new attackers every 6 hours. Monthly is $19.99 with a 14-day free trial and no card needed.

Start a 14-day free trial Or test 200 entries first: free, no signup

Firewall Guides

ThreatListPro uses a plain-text feed for firewalls that support external IPv4 address lists.

Check Point Palo Alto FortiGate pfSense OPNsense SonicWall Cisco ASA Sophos XG UniFi

Related Resources

More dated alerts, and guides on the VPN attacks that follow.

All Security Alerts Check Point Brute Force Protection: EDL Setup Guide Password Spraying on VPNs Block an IP Address at the Firewall VPN Brute Force Explained SonicWall CVE-2026-19868: Which SonicOS Build Fixes It?