Sophos Firewall VPN Brute Force: Stop Failed Login Attempts

Lock down the portal, require MFA, and block listed IPv4 sources on Sophos Firewall. The setup below is for SFOS 21.0 or later and is checked against Sophos's SFOS 21.5 and 22.0 documentation.

Start a 14-day free trialOr test 200 entries first: free, no signup
5.4M+
IPv4 Addresses in the Full List
6h
checked for new attackers every 6 hours
200
Free Sample Entries
By CalMax Systems Security Research · Last updated: November 16, 2026

The short answer

Sophos Firewall VPN brute force needs layers. Turn on Login security, require MFA, and remove unneeded WAN portal access first. On SFOS 21.0 or later, a third-party threat feed can block listed IPv4 sources before they reach firewall VPN services, using ThreatListPro's Sophos-format URL of single addresses.

Can Sophos load ThreatListPro’s full CIDR feed? No. Sophos third-party threat feeds take bare IPv4 addresses, not ranges, so use sophos.txt: single IPs, plus ranges of /22 or smaller expanded into host addresses. Larger ranges are left out, and they hold most of the listed addresses, so on Sophos the feed blocks only a small share of the 5.4M+. It needs SFOS 21.0 or later with Xstream Protection; XG hardware can’t run SFOS 21.0.

Free sample: Sophos-format sample, no signup.

Sophos Firewall Failed Login Attempts: What They Mean

A WAN-facing VPN portal or SSL VPN service accepts connections from the internet. Automated clients can submit credentials and create repeated authentication failures. Sophos records authentication events with components including VPN Portal Authentication and SSL VPN Authentication.

Sophos Firewall user portal brute force is also a concern if the user portal is exposed on WAN. Sophos recommends that you do not turn on WAN access to the user portal. The separate VPN portal may need WAN access for client provisioning or Microsoft Entra ID SSO.

Open Log viewer, choose the Authentication module, then filter for failed status and the relevant component. A high count does not by itself prove a successful sign-in. Review successful events, source IPs, affected usernames, and your identity-provider logs.

Sophos's Own Fixes (Do These First)

These controls are built into Sophos Firewall. Use them before adding an external list.

Control Exact path What it does Limit
Login security Administration > Admin and user settings > Login security Blocks sign-ins after the configured failed-attempt count from one source IP. The block covers all services, including VPN and user portals. Distributed attempts from new IPs can remain below each source-IP threshold.
MFA / OTP Authentication > Multi-factor authentication Require MFA for the VPN portal and the VPN services you use, including SSL VPN remote access. It protects account access. It does not stop requests from reaching the service.
Remove WAN portal access Administration > Device access Clear WAN for services that do not need internet access. Sophos says not to expose the user portal on WAN. The VPN portal may need WAN access for provisioning changes or Microsoft Entra ID SSO.
Restrict WAN sources Administration > Device access > Local service ACL exception rule Allow only trusted hosts, networks, or required countries to reach VPN services. Traveling users and changing source addresses need an access plan.
Current firmware Backup & firmware > Firmware Applies current security fixes and maintenance releases. Upgrades need normal change control and compatibility testing.

Why a Sophos Firewall Block IP List Helps

The controls above react locally or narrow who can connect. A block list adds prior knowledge. Sophos documents that Active threat response can match a third-party feed's source IPv4 indicators against system-destined traffic to services under Administration > Device access, including the VPN portal and VPN.

ThreatListPro contains 5.4M+ IPv4 addresses from real attacks on live production Palo Alto GlobalProtect VPN portals in the US. It is checked for new attackers every 6 hours. The standard feed is plain text, one IPv4 address or CIDR per line, with single IPs written as /32. Sophos gets its own URL, described next.

Sophos format: Sophos third-party feeds accept bare IPv4 indicators and do not support IP ranges, network addresses, or IPv6. ThreatListPro therefore publishes a separate Sophos-format URL. It lists single IPs, plus ranges of /22 (1,024 addresses) or smaller expanded into their host addresses. Larger ranges are left out. They hold most of the 5.4M+ addresses, so the Sophos feed blocks only a small share of them. To cover the larger ranges, use manually maintained IP host objects in a Local service ACL exception rule.

Sophos Firewall Block IP List Setup, Step by Step

For XGS, virtual, software, and cloud firewalls on SFOS 21.0 or later with the Xstream Protection bundle. SFOS 21.0 and later do not support XG hardware appliances.

01

Apply the built-in protections

Configure Login security, MFA, and Device access as shown above. Confirm your firmware and license. Third-party threat feeds were added in SFOS 21.0 and require the Xstream Protection bundle.

02

Copy the Sophos-format URL

Subscribers use the Sophos URL, not the standard blocklist.txt URL:
https://api.threatlistpro.com/v1/YOUR_API_KEY/sophos.txt

To test first, use the free Sophos-format sample (no signup):
https://api.threatlistpro.com/v1/sample/sophos.txt

Both list bare IPv4 addresses, one per line, with no comments: single IPs, plus ranges of /22 or smaller expanded into their host addresses. Larger ranges are left out because Sophos does not accept them in a third-party threat feed. The file follows the main list, which is checked for new attackers every 6 hours.

03

Add the third-party threat feed

Go to Active threat response > Third-party threat feeds and click Add. Enter a name. Set Action to Monitor for the first review, Indicator type to IPv4 address, and External URL to the Sophos-format URL.

Set Authorization to No authentication, because your API key is part of the URL, and select Validate server certificate. Choose 1 hour as the polling interval, or the nearest option your model offers. XGS 87/87w, 88/88w, and 107/107w only offer 24 hours, 7 days, and 30 days, so choose 24 hours on those models. Click Test connection, then Save.

04

Check your users and switch to Block

Compare trusted user source networks with the feed. If a trusted IPv4 address must bypass Active threat response, go to Active threat response, click Add threat exclusions, add the narrowest justified exclusion, and click Apply. Sophos warns that exclusions can expose the network. When the review is complete, edit the feed and change its action to Block, which logs and blocks matches.

05

Turn on logs and verify

Go to System services > Log settings. Select Active threat response for local reporting and any configured external reporting destination, then click Apply. Open Log viewer and select Active threat response to review blocked indicators. Check the feed's synchronization status under Active threat response > Third-party threat feeds.

06

Optional: block CIDR ranges with static objects

For a range you have reviewed, go to Hosts and services > IP host > Add and create a Network or IP range object. Then go to Administration > Device access, add a Local service ACL exception rule, select WAN as the source zone, choose the objects as source networks or hosts, select SSL VPN, VPN portal, and/or IPsec, and set Action to Drop. These objects do not update from the ThreatListPro URL. Maintain them yourself. To list the ranges the Sophos URL leaves out, run grep -v '^#' blocklist.txt | awk -F/ '$2 < 22' on the standard blocklist.txt.

What a Block List Can't Do

Which Fix Stops What

Control Guessed password alone succeeds? Stops a listed IP before login? Main limit
MFA No No Requests still reach the service.
Login security Yes, until the source IP is blocked After the source reaches the configured failure threshold Per source IP. Distributed attempts can continue.
WAN access restriction or ACL allow rule Not applicable Yes, when the source is outside the allowed set Requires predictable trusted sources.
Sophos-format third-party feed Not applicable Yes, for listed bare IPv4 addresses Ranges larger than /22 are left out. No IPv6.
Static Local service ACL drop rule Not applicable Yes, for configured hosts and ranges Does not update from a URL.

Frequently Asked Questions

Why does Sophos Firewall show so many failed login attempts?

A WAN-facing VPN portal or VPN service can receive automated password attempts. In Log viewer, select the Authentication module and filter for failed events and the VPN Portal Authentication or SSL VPN Authentication component. Login security blocks the source IP after your configured threshold, but attempts distributed across new IPs can continue.

Does Sophos XG brute force protection cover the VPN portal?

On current SFOS documentation, yes. Administration > Admin and user settings > Login security can block sign-ins to all services after repeated failures from one source IP. Sophos says the web admin console, CLI, VPN portal, and user portal won't open from that IP during the block. This is source-IP protection, not an account-wide cure.

Can a Sophos Firewall block IP list protect SSL VPN?

On SFOS 21.0 or later, a third-party IPv4 threat feed can match source IPs for system-destined traffic to services listed under Administration > Device access, including the VPN portal and VPN. Set the feed to Block to log and block matches. The feature requires the Xstream Protection bundle.

Can Sophos use the standard ThreatListPro URL?

Not the standard URL. It lists one IPv4 address or CIDR per line, and Sophos says third-party feeds don't support IP ranges, network addresses, or IPv6. Use the Sophos-format URL instead: https://api.threatlistpro.com/v1/YOUR_API_KEY/sophos.txt. It lists bare IPv4 addresses, with ranges of /22 or smaller expanded. Larger ranges are left out, and they hold most of the listed addresses.

Can I block the larger ThreatListPro ranges another way on Sophos Firewall?

Yes, but not as a URL-updated threat feed. Sophos IP host objects support network and IP range types, and a Local service ACL exception rule can use networks, IP ranges, or host groups as its source and Drop traffic to SSL VPN, VPN portal, or IPsec. You must create and maintain those objects yourself.

Can I test the Sophos firewall block IP list for free?

Yes. The public sample contains 200 entries and needs no signup. For Sophos, use the Sophos-format sample at https://api.threatlistpro.com/v1/sample/sophos.txt. The full list has a 14-day free trial with no card needed. Monthly is $19.99, yearly is $200, and Enterprise is $99.99 per month.

Sources

Block Listed IPv4 Sources

14-day free trial, no card needed. 14-day money-back guarantee.

Start a 14-day free trialOr test 200 entries first: free, no signup

Monthly $19.99 · Yearly $200 · Enterprise $99.99/mo

Firewall Setup Guides

ThreatListPro publishes a plain-text IPv4/CIDR feed. Check each firewall's format requirements before use.

Palo Alto FortiGate pfSense OPNsense SonicWall Cisco ASA Sophos XG UniFi

Related Resources

Learn more about IP blocklists, VPN security, and how ThreatListPro compares to alternatives.

What Is an External Dynamic List (EDL)? VPN Brute Force Attacks Explained IP Blocklist vs Enterprise Threat Feed Stop Account Lockouts from Brute Force ThreatListPro vs FireHOL ThreatListPro vs AbuseIPDB Best VPN Brute Force Protection 2026 All Firewall Setup Guides