5.4M+ IPv4 addresses from known VPN attack sources, checked for new attackers every 6 hours. Apply SonicWall's own controls first, then deny listed IPs at the SSLVPN access rule.
Start a 14-day free trialOr test 200 entries first: free, no signupTurn on MFA and the right lockout controls first. Then load a known-attacker list as a Dynamic External Address Group, refresh it hourly, and put it in a WAN-to-WAN deny rule for the SSLVPN service above SonicWall's default allow rule. This reduces listed-source traffic; it does not stop a new IP's first attempt.
Which ThreatListPro URL should SonicWall use? The subscriber sonicwall.txt URL, not blocklist.txt. SonicOS counts each line as one address object, so this file is 100 merged lines: additions from the last 90 days first (up to a quarter of the lines), then the widest ranges. It covers part of the full list, not all of it. If your model has room, sonicwall-150.txt to sonicwall-250.txt cover more. Check address-object capacity before you enforce it.
Free sample: 200 entries, no signup.
Repeated SonicWall failed login attempts mean someone on the internet can reach your SSL VPN and is trying passwords that don't work. Repeated failures can trigger the lockout controls configured on the firewall or identity provider. Attempts spread across many source addresses can stay below a threshold applied to one source.
Treat the account side and the network side separately. MFA protects an account if its password is exposed. Lockout limits repeated failures. Geographic restrictions and an IP list reduce which sources can reach the SSLVPN service.
Use the controls that fit your authentication source and where your users connect from.
| Fix | Where | What it does | Limit |
|---|---|---|---|
| Update firmware and reset migrated passwords | Gen 7: update to SonicOS 7.3.4-7015 or later. Gen 8: update to SonicOS 8.2.3-8015 or later. SonicWall’s November 2026 advisory (SNWLID-2026-0014, CVSS 8.8) lists 7.3.3-7015 and older, and 8.2.2-8015 and older, as affected, including an exploited SSL VPN SAML/MFA bypass; a second advisory lists 7.3.4-7013 as affected. See which SonicOS build fixes CVE-2026-19868. Gen 6 is end of support and gets no fixes. Reset the passwords of local users with SSL VPN access, especially accounts migrated from Gen 6, and remove unused accounts. | The 7.3.x line added protections against brute-force attacks and more MFA controls; 7.3.4 and 8.2.3 also fix high-severity SonicOS flaws. Resetting removes passwords carried over from older firmware. | Needs a maintenance window. Patching does not stop password guessing against valid accounts. |
| TOTP MFA | SonicOS 7: Device > Users > Local Users & Groups. Edit a user or group and set One-time password method to TOTP. SonicOS 6.5 (TOTP added in 6.5.3.1): Users > Local Users & Groups. | Adds a time-based one-time password to SSL VPN authentication. | Users must first bind the authenticator through the Virtual Office portal. Keep the portal reachable until enrollment is complete. |
| Admin/user lockout | SonicOS 7: Device > Settings > Administration > Login / Multiple Administrators. The documented maximum lockout period is 60 minutes. | Limits repeated failed logins according to the threshold and lockout period you configure. | The local account lockout setting applies only to locally authenticated users. Configure lockout at LDAP/AD, RADIUS, or TACACS+ for external users. SonicWall also suggests IP-based lockout or MFA for them. |
| Geo-IP on SSLVPN | Policy > Rules and Policies > Access Rules. Edit the WAN-to-WAN SSLVPN rule and enable a custom Geo-IP selection. | Restricts SSL VPN access according to the countries you allow or block. | Requires the Geo-IP Filter service. Users connecting through an unexpected country need another approved route. |
| Change the SSL VPN port | Network > SSL VPN > Server Settings. The documented default is 4433. | Moves the service away from its default port. | Every client must use the configured port. Changing a port is not an authentication control. |
| Disable unused Virtual Office access | SonicOS 7.0.1-5145 or later: Network > SSL VPN > Portal Settings > Disable Virtual Office on Non-LAN Interfaces. SonicOS 6.5.4.13-105n or later: Manage > SSL VPN > Portal Settings. | Removes the web portal from non-LAN interfaces when it is not needed. | Do not disable it while users still need the portal to bind TOTP. |
| Botnet Filter | Go to Policy > Security Services > Botnet Filter > Settings, enable blocking in Firewall Rule-Based Connections mode, then edit the WAN-to-WAN SSLVPN rule under Policy > Rules and Policies > Access Rules and enable Botnet / CC under Security Profiles. | Blocks connections to or from addresses in SonicWall's Botnet command-and-control database. | It is a licensed service, and its database is not a VPN-specific failed-login list. |
Repeated failed logins call for account and source controls. If an unexpected login succeeds, or SonicWall publishes an SSL VPN notice that applies to your model and firmware, follow the vendor's incident and remediation guidance immediately. A block list can deny listed sources; it does not install firmware, reset credentials, or patch a vulnerability.
The controls above protect accounts or restrict broad classes of sources. A deny rule sourced from a Dynamic External Address Group rejects listed IP addresses at the SSLVPN access rule. SonicWall documents WAN-to-WAN blocking for the SSLVPN service and placing that deny rule above its default allow rule.
ThreatListPro provides 5.4M+ IPv4 addresses in plain text, one IPv4 address or CIDR per line (the SonicWall feed in step 01 carries only the ranges). The data comes from real attacks on live production Palo Alto GlobalProtect VPN portals in the US and is checked for new attackers every 6 hours.
These steps cover SonicOS 7, SonicOS 8 (same menus) and SonicOS 6.5 in Classic Mode. SonicOS Policy Mode applies the downloaded group in a Security Policy.
Test with the free 200-entry sample, or copy the subscribed SonicWall feed URL: https://api.threatlistpro.com/v1/YOUR_API_KEY/sonicwall.txt. It is plain text with 100 lines, one IPv4 CIDR range per line, merged so none overlap: entries added in the last 90 days are always kept (up to a quarter of the lines, unless a wider range already covers them), and the rest are the widest ranges. SonicOS counts every line as one address object, whatever the size of the range, so this file leaves out most of the smaller ranges and single IPs. If your firewall has room for more, use sonicwall-150.txt, sonicwall-200.txt, or any size from 10 to 250 as sonicwall-N.txt. Other firewalls use blocklist.txt, which includes everything.
Before enforcement, compare the list with the public source IPs used by your own administrators and remote users. If a trusted network appears, make an explicit allow rule for it above the deny rule.
In SonicOS 7, go to Object > Match Objects > Dynamic Group and select Add. Enter ThreatListPro; SonicOS prepends DEAG_. Assign the WAN zone, leave FQDN off, enable Periodic Download, select 1 hour, choose HTTPS, paste the feed in URL Name, and save. In SonicOS 6.5, use Manage > Policies > Objects > Dynamic External Objects and the equivalent fields.
A Dynamic External Address Group creates one read-only address object per valid unique entry, whatever the size of each range. SonicOS limits IP-address DEAOs to 25% of the device's address-object limit and also by its remaining address-object capacity. Export a Tech Support Report and find Max Address Objects Base; 25% of it, minus the address objects already in use, must cover the file's lines (100 for sonicwall.txt).
Go to Policy > Rules and Policies > Access Rules, choose WAN to WAN, and add a rule with Action Deny, Source Address DEAG_ThreatListPro, and Destination Port/Services SSLVPN. Save it and confirm that it appears above the default SSLVPN allow rule.
In the SonicOS 7 CLI, run show dynamic-external-object DEAG_ThreatListPro group-members to list the downloaded entries, and add statistics to see download results. In Policy > Rules and Policies > Access Rules, show the Rx Packets statistics column (Grid Settings > Statistics) and watch the deny rule's counter. Confirm separately that trusted users can still connect.
show dynamic-external-object DEAG_ThreatListPro group-members show dynamic-external-object DEAG_ThreatListPro statistics
This error usually means the file has more entries than the firewall can load as Dynamic External Address Objects (see SonicWall: DEAG and DEAO maximums). SonicOS counts lines, not addresses: one /15 range loads as a single object, while a few hundred lines can fail. Use the SonicWall feed from step 01 (sonicwall.txt, 100 lines), not blocklist.txt, then select Download now on the group. If it still fails, delete Dynamic External Address Groups you no longer use (each one also uses an address object) and try a smaller file such as sonicwall-50.txt. A smaller file is built the same way: recent additions are kept, then the widest ranges fill the rest. If you need help sizing it, export a Tech Support Report, note the Max Address Objects Base value, and email it to support@threatlistpro.com.
Dynamic External Address Groups are a SonicOS firewall feature. If an SMA is published through a SonicWall firewall, enforce the feed on that firewall's rule for the SMA service. Configure the SMA's native controls: SMA 100 10.2.1.12 and later block a source IP after continuous login failures (on by default), while SMA 1000 supports locking a TOTP user after repeated failed TOTP attempts.
| MFA | Lockout | Geo-IP | ThreatListPro DEAG | |
|---|---|---|---|---|
| Protects an account after a password is exposed | Yes | Temporarily limits retries | No | No |
| Reduces repeated attempts from one source | No | Yes, when configured for that source or account | Outside allowed countries | For listed IPs |
| Blocks before an SSLVPN login attempt | No | No | Outside allowed countries | For listed IPs |
| Cost | Built in for supported authentication | Built in | Licensed service | $19.99/mo or free 200-entry sample |
Start with MFA, appropriate lockout controls, and source restrictions. Then load a known-attacker list as a Dynamic External Address Group and put a WAN-to-WAN deny rule for the SSLVPN service above SonicWall's default allow rule. The list reduces attempts from listed sources; it does not replace MFA or stop a new IP's first attempt.
For local users, configure Admin/user lockout at Device > Settings > Administration > Login / Multiple Administrators. For LDAP, Active Directory, RADIUS, or TACACS+ users, configure lockout at the external identity provider. SonicWall says the local account lockout setting does not apply to users authenticated by those external providers.
SonicWall's licensed Botnet Filter uses SonicWall's botnet command-and-control database. In firewall-rule-based mode, enable Botnet / CC on the WAN-to-WAN SSLVPN rule. A ThreatListPro Dynamic External Address Group supplies a separate source list built from observed VPN attacks. Use the controls together; neither replaces MFA. See password spraying on VPNs.
Yes. TOTP makes a stolen password insufficient by itself, while lockout limits repeated failures. In SonicOS 7, assign TOTP under Device > Users > Local Users & Groups; users bind the authenticator through Virtual Office. Configure Admin/user lockout under Device > Settings > Administration > Login / Multiple Administrators. See account lockout prevention.
In SonicOS 7, go to Object > Match Objects > Dynamic Group, create a non-FQDN group in the WAN zone, choose HTTPS, enable Periodic Download, and use a 1 hour interval. Then use DEAG_ThreatListPro as the source in a WAN-to-WAN deny rule whose service is SSLVPN.
Yes. SonicWall documents one IP address per line and says the file can include subnets in CIDR format. ThreatListPro is plain text with one IPv4 address or CIDR per line; single IPs are written as /32.
Yes, if the firewall has enough address-object capacity. SonicOS 6.5 has Dynamic External Objects. Its GUI path is Manage > Policies > Objects > Dynamic External Objects, while SonicOS 7 uses Object > Match Objects > Dynamic Group. The WAN-to-WAN SSLVPN deny rule uses the downloaded group as its source. Verify that the model has room for the file's lines (100 for sonicwall.txt).
Yes. The free sample contains 200 entries and needs no signup: https://raw.githubusercontent.com/pcchiu2023/threatlistpro-blocklist/main/data/sample/blocklist.txt. The full list is $19.99 per month with a 14-day free trial and no card needed.
Monthly $19.99 with a 14-day free trial and no card needed. Yearly $200. Enterprise $99.99/mo. All paid plans include a 14-day money-back guarantee.
Start a 14-day free trialOr test 200 entries first: free, no signupChoose your firewall for platform-specific setup instructions.
Learn more about IP blocklists, VPN security, and how ThreatListPro compares to alternatives.